your location: Products > Steam & Condensate Systems > Condensate Pump/Trap Combination Package (CPT) (Steam-Pressure-Powered) Model CPT-3D

Condensate Pump/Trap Combination Package (CPT) (Steam-Pressure-Powered)

Model CPT - 3D

Condensate Pump/Trap Combination Package
(Steam Pressure-Powered)


The Model CPT-3D, Condensate Pump/Trap Combination Package, is a manufactured, ready-to-install system designed for installation on single heat transfer sources. The Condensate Pump/Trap Combination Package allows the heat transfer source to operate in a vacuum condition, increasing the heat transfer efficiency. The result is substantial savings in energy costs at attractive pay-back periods. Designed for efficient pumping of condensate, CPT-3D is not vented to atmosphere, therefore there is no additional piping needed for a large vent. The CPT-3D utilizes steam power in lieu of electric motors, eliminating the need for wiring motors, starters, and controls. The steam-powered pump package is capable of operation in flammable environments. Operating by steam pressure versus electric power, reduces pumping costs. The pump employs a float operated snap-acting mechanism with no external seals or packing, which eliminates seal maintenance, which is required on conventional pumps. All internal pump components and mechanism are constructed of stainless steel.

---

View detailed information on Model CPT-3D, Condensate Pump/Trap Combination Package (PDF)

---

Legend
Approx. Dimensions: 80 "H x 68"L x 48"W

A. Condensate Inlet 4" NPT
B. Condensate Discharge (2) 2" NPT
C. Air Outlet
D. Steam Inlet ½" NPT
E. Receiver Tank 12"x48"
F. Drain ½" NPT

---

---

Standard Construction

• Fabricated Angle Iron Frame
• Fabricated Steel Tank
• Bronze Ball Valves
• Thermodynamic Steam Trap
• Cast Iron Pump with Gauge Glass, and Stainless Steel internal components and Check Valves
• Hydrostatically Tested
• High Temperature Industrial Enamel Paint
  
  

---

Conditions of Operation
Max. Allowable Pressure / Temperature: 125 psig / 450oF
Discharge rate per cycle: 14.2 gal.
Max. instantaneous discharge rate: 180 gpm
Steam Consumption: 3 lbs. per 1000 lbs. of liquid pumped
Compressed Air Consumption: 100 SCF per 1000 lbs. of liquid pumped

---

System Options

• Additional / Oversized condensate inlet connection(s)
• Oversized condensate receiver
• Oversized atmospheric vent(s)
• Carbon Steel 3 piece Ball Valves
• Forged Steel Gate Valves
• Low-profile design for height restricted applications
• All Welded piping
• Fabricated Square Tubing frame
• Flash Steam Heat Recovery System only without Condensate Inlet for Flash Recovery from existing Atmospheric Tanks.
  
  

---

NOTES:

Savings are based on max. potential savings at max. pump capacity on 8400 hr./yr. of continuous operation
Steam costs at $5.00/MM Btu
Savings assume no back pressure on Vented Flash Steam.
Water side flow rate based on at 80oF temperature change from 60oF to 140oF.
Savings based on approx. calculations.

---

Cost Justification for Model CPT-3D

 

For more information on how EnviroSep can provide your company with an Integrated Solution for your Fluids Handling, Heat Transfer, and/or Energy Recovery needs, use our quick & easy Online Quote Request Form, call our main office at 843-546-7400 (you can fax us at 843.546.7407) or

---

domestic water pumps | hot water pumps | steam & condensate pumps | boiler room pumps | wastewater heat recovery pumps | packaged pumps | misc. industrial pumps | electrical & pump controls | custom pumps | private label pumps || site map