your location: Products > Boiler Room Systems > Blowdown Flash Vessel with Heat Recovery > Heat Recovery on Flash & Condensate (FSHR-FC)

Heat Recovery on Flash & Condensate (FSHR-FC)

Flash Steam Heat Recovery Unit (Steam & Condensate)

The EnviroSep Model FSHR-FC, Flash Steam Heat Recovery Unit is a manufactured unit featuring dual Recovery Module, facilitating both flash steam and condensate heat extraction. The FSHR-FC is ideally suited for heating continuous flow of fluid, such as make-up water to boiler feedwater system. The atmospherically vented unit helps recovery and utilize valuable heat generally lost during boiler blowdown. A Shell and Tube Recovery Module with U-tube configuration is used for recovering energy from the flash steam, while the condensate utilizes an efficient Plate and Frame Recovery Module. The Model FSHR-FC is a complete unit including a Carbon Steel Flash Vessel. Non-continuous flow applications may require additional recirculation and/or relief valving. An optional make-up water control valve may be installed upstream of the unit in order for the make-up to be allowed to thermally expand to atmosphere to prevent system damage. Each Unit is custom engineered and designed to meet specific system requirements. All systems are fabricated and welded per ASME Section IX Code and Standards, and are Hydrostatically tested prior to shipment.

---

View detailed information on Model FSHR-FC, Flash Steam Heat Recovery Unit (PDF)

---

Legend
A. Flash Vessel
B. Shell and Tube Flash Recovery Module
C. Plate and Frame Recovery Module
D. Vent
E. Blowdown Inlet
F. Make-up Water Inlet
G. Heated Make-up Water Supply
H. Condensate Discharge
I. Isolation Valves

---

Standard Construction

• Fabricated Structural Steel frame
• Shell and Tube, U-Tube Recovery Module
• Plate and Frame Recovery Module
• Carbon Steel Flash Vessel
• Bronze Gate Valves
• Hydrostatically Tested
• High Temperature Industrial Enamel Paint

---

Sizing and Selection
Units are custom engineered for individual systems, based upon the selection of the system parameters:

I. System Flow Rate: Range of 5 lb/hr to 30,000 lb/hr
II. Blow-down Upstream Pressure: Range of 5 psig to 250 psig
III. Flash Vessel Pressure: Range of 0 psig to 15psig
IV. Dimensions: Based on specific requirements

---

Conditions of Operation
Max. Allowable Pressure: 125 psig
Max. Allowable Temperature: 375 oF

---

EnviroSep Heat Recovery Systems - see also:
Heat Recovery on Flash (FSHR-F) ~ Heat Recovery on Condensate (FSHR-C)

For more information on how EnviroSep can provide your company with an Integrated Solution for your Fluids Handling, Heat Transfer, and/or Energy Recovery needs, use our quick & easy Online Quote Request Form, call our main office at 843-546-7400 (you can fax us at 843.546.7407) or

---

domestic water pumps | hot water pumps | steam & condensate pumps | boiler room pumps | wastewater heat recovery pumps | packaged pumps | misc. industrial pumps | electrical & pump controls | custom pumps | private label pumps || site map