| EnviroSep provides Integrated Solutions, nationwide & worldwide, for Fluids Handling, Heat Transfer, and Energy Recovery |
| Call Us @ 843-546-7400 — EnviroSep World Headquarters - Georgetown, South Carolina USA |
| site map |
your location: Products > Packaged Pumping Systems > Variable Speed Systems w/Variable Frequency Drive > Closed System (PPS-VC)
Variable Speed Packaged Pumping System Closed System
The EnviroSep Model PPS-VC, Packaged Pumping System is a UL-Listed factory assembled and tested system used for fluid handling systems which are configured in closed circuits. The PPS-VC provides significant power savings by automatically controlling the speed of the pump(s) based on the actual system demand. Transmitters signal to the PPS-VC System Controller which controls a Variable Frequency Drive for each pump to the appropriate speed. The PPS-VC can be configured for pumping of a variety of fluids at a controlled flow rate in any industrial or commercial application. Process fluid enters a common system header and by use of centrifugal pumps is pumped at a controlled flow rate to a common discharge header. The Variable Frequency Drive may incorporate Manual or Automatic bypasses. The PPS-VC also allows for system thermal expansion based on the system volume.
A UL-Listed control panel with single-point power connection is pre-wired to all electrical sources. Each Unit is custom engineered and designed to meet specific system requirements. All systems are fabricated and welded per ASME Section IX Code and Standards, and are Hydrostatically tested prior to shipment. The Model PPS-VC speeds installation and start-up of fluid systems which provide significant savings to contractors, engineers, and facility owners.
View detailed information on Model PPS-VC, Packaged Pumping System (PDF)
- Structural Channel Base
- Carbon Steel Piping
- Operational Testing
- Pump Isolation Valves
- Hydrostatically Tested
- High Temperature Industrial
- Enamel Paint
System Options
Conditions of Operation
- Max. Allowable Press.: 125 psig
- Max. Allowable Temp.: 240° F.
Legend
A. Base-mounted, End-suction Centrifugal Pumps
B. Triple Duty Valve
C. Variable Frequency Drive
D. System Inlet / Outlet Thermometers
E. Air Separator with Auto Air Vent
F. Bladder-Type Expansion Tank
G. Pump Differential Pressure Gauge
H. UL-listed Electrical Control Panel
100
100
$ 0
90
73
$ 4,329
80
51
$7,856
70
34
$10,581
60
22
$12,505
50
13
$13,948
6
$15,070
30
3
$15,551
Notes:
1. Savings are based on max. potential savings at max. pump capacity on 8600 hr./yr. of continuous operation.
2. Power costs at $0.10/kW-hr.
3. Savings assume continuous operation of one (1) 25 Hp Pump.
4. Savings based on approx. calculations.
For more information on how EnviroSep can provide your company with an Integrated Solution for your Fluids Handling, Heat Transfer, and/or Energy Recovery needs, use our quick & easy Online Quote Request Form, call our main office at 843-546-7400 (you can fax us at 843.546.7407) or
domestic water pumps | hot water pumps | steam & condensate pumps | boiler room pumps | wastewater heat recovery pumps | packaged pumps | misc. industrial pumps | electrical & pump controls | custom pumps | private label pumps || site map