Variable
Speed Systems w/Variable Frequency Drive - Open System (PPS-VO)
The EnviroSep Model PPS-VO, Packaged Pumping System is a UL-Listed
factory assembled and tested system used for fluid handling systems
which are configured in open circuits. The PPS-VO provides significant
power savings by automatically controlling the speed of the pump(s)
based on the actual system demand. Transmitters signal to the PPS-VO
System Controller which controls a Variable Frequency Drive for each
pump to the appropriate speed. The PPS-VO can be configured for pumping
of a variety of fluids at a controlled flow rate in any industrial
or commercial application. Process fluid enters a common system header
and by use of centrifugal pumps is pumped at a controlled flow rate
to a common discharge header. The Variable Frequency Drive may incorporate
Manual or Automatic bypasses.
A UL-Listed control panel with single-point
power connection is pre-wired to all electrical sources. Each Unit
is custom engineered and designed to meet specific system requirements.
All systems are fabricated and welded per ASME Section IX Code and
Standards, and are Hydrostatically tested prior to shipment. The Model
PPS-VO speeds installation and start-up of fluid systems which provide
significant savings to contractors, engineers, and facility owners.
View pps-vo Specifications
View
detailed information on Model
PPS-VO, Packaged Pumping System (PDF)
Standard
Construction
|
|
System
Options
-
Stand-by
pumps
-
Suction
Diffuser
-
Panel-mounted
Gauges
-
Flexible
Connectors
-
Vibration
Isolation
|
|
Legend
A. Base-mounted, End-suction Centrifugal Pumps
B. Triple Duty Valve
C. System Inlet / Outlet Thermometers
D. Variable Frequency Drive
E. Pump Differential Pressure Gauge
F. UL-listed Electrical Control Panel
|