Standard Heat Transfer System Steam-to-Water Shell and Tube

The EnviroSep HTS, Standard Heat Transfer System is a UL-Listed, factory manufactured and tested system used in conventional building hydronic heating systems which utilizes steam as the heating source. Heating Hot Water is supplied at a standard 180°F and is recirculated through the building system by use of centrifugal pumps which are sized to meet specific building requirements. The Model HTS provides Air-free, Hot Water at a controlled flow rate, while automatically refilling under normal system losses. Also, the HTS allows for system thermal expansion/compression based on the building system volume. A UL-Listed, Industrial Control Panel with single-point power connection is pre-wired to all electrical field devices and power sources. The Model HTS speeds installation and start-up of building hydronic heating systems which provides significant savings to contractors, engineers, and building owners.

Standard Features:

• ASME, Shell & Tube Heat Exchanger - U-tube, with U-stamp
• Base-mounted, End-suction Pumps
• Vortex Air Separator, with Auto Air Vent
• Bladder Expansion/Compression Tank
• Triple Duty Valves & Suction Diffusers
• UL Listed NEMA 12 Industrial Control Panel
• Float & Thermostatic Steam Trap
• Supply/Return Thermometers
• Safety Relief Valve
• Make-up Water Assembly
• Pump Differential Pressure Gauges
• ASME Section IX Welding
  

Options:

• PLC System Controller w/ Touch Screen
• NEMA 7/9 Explosion-proof Rating
• Flexible Pump Connectors
• Seismic or Vibration Isolators
• Plate & Frame Heat Exchangers
• Vertical Inline Centrifugal Pumps
• Combination Air & Dirt Separator
• Specific Performance Criteria (Upon Request)