Vented Condensate Pump Package (VCP) (Steam Pressure-Powered): Model VCP - 2: Fluid Handling, Heat Transfer and Energy Recovery Systems by EnviroSep

Vented Condensate Pump Package (VCP) (Steam Pressure-Powered)

Model VCP - 2

The Model VCP-2, Vented Condensate Pump Package is a manufactured, ready-to-install system featuring a Steam-Powered Condensate Pump. Designed for efficient pumping of condensate, VCP-2 utilizes steam power in lieu of electric motors, eliminating the need for wiring motors, starters, and controls. The steam-powered package is capable of operation in flammable environments. Operating by steam pressure versus electric power, reduces pumping costs. The pump employs a float operated snap-acting mechanism with no external seals or packing, which eliminates seal maintenance, which is required on conventional pumps. All internal pump components and mechanism are constructed of stainless steel.

View detailed information on Model VCP-2, Vented Condensate Pump Package (PDF)

Legend

Approximate Dimensions: 55"H x 40"L x 26"W

A. Condensate Inlet 2" NPT
B. Condensate Discharge 2" NPT
C. Vent 3" NPT
D. Steam Inlet ½" NPT
E. Receiver Tank 12" x 36"
F. Drain ½" NPT

Standard Construction

Fabricated Angle Iron Frame
Fabricated Steel Tank
Bronze Ball Valves
Thermodynamic Steam Trap
Cast Iron Pump with Gauge Glass, and Stainless Steel internal components and Check Valves

Hydrostatically Tested

High Temperature Industrial Enamel Paint

Conditions of Operation
Max. Allowable Pressure / Temperature: 125 psig / 450oF
Discharge rate per cycle: 4 gal.
Max. instantaneous discharge rate: 30 gpm
Steam Consumption: 3 lbs. per 1000 lbs. of liquid pumped
Compressed Air Consumption: 100 SCF per 1000 lbs. of liquid pumped

System Options

Additional / Oversized condensate inlet connection(s)
Oversized condensate receiver
Oversized atmospheric vent(s)
Carbon Steel 3 piece Ball Valves
Forged Steel Gate Valves
Low-profile design for height restricted applications
All Welded piping
Fabricated Square Tubing frame