Stainless Steel Receiver Electric Condensate Pumps (UL Listed)

Model ECPL-D

Industrial Electric Condensate Duplex
Pump Package (Low NPSH)


The Model ECPL-D, Electric Condensate Duplex Pump Package is a condensate pumping unit manufactured as a ready-to-install system featuring a Stainless Steel Condensate Receiver and Low NPSH Regenerative Turbine Pumps. Sized to meet specific system needs, the ECPL-D Series features non-cavitating pumps, allowing efficient pumping even under adverse inlet conditions. Utilizing the efficient design of Inducer-type Regenerative Turbine Pumps, the ECPL-D Series is capable of operating at 2 ft NPSHA. The ECPL-D Series includes pump suction isolation valves for each pump. A Stainless Steel Condensate Receiver is utilized to prolong the life of systems subject to corrosive condensate. A mechanical alternator is standard for automatic alternation of the Lead Pump. A NEMA 12, UL-Listed Industrial Control Panel with single-point power connection is furnished pre-wired to all electrical sources. The complete package is UL-Listed.

View ECPL-D specifications

---

View detailed information on Model ECPL-D, Electric Condensate Duplex Pump Package (PDF)

---

Legend
A. Condensate Inlet
B. Vent
C. Condensate Discharge (2)
D. Auxiliary Connection A
E. Auxiliary Connection B
F. Receiver Tank
G. Drain

---

Standard Construction

• Fabricated Structural Steel Frame
• Stainless Steel Condensate Receiver
• Suction Isolation Valve
• Pump Discharge Flow Throttling Valve & Check Valve
• Low NPSH Regenerative Pump
• UL-Listed Industrial Control Panel
• Hydrostatically Tested
• High Temperature Enamel Coating on base
  

---

Package Options

• Additional / Oversized Condensate Inlet connection(s)
• Gauge Glass on Receiver
• Oversized Condensate Receiver
• Oversized Atmospheric Vent(s)
• Pump Discharge Pressure Gauge
• Overflow Pipe to 6" height above base
• Forged Steel Gate Valves
• Pump Run-time Meter
• Low-profile design for height restricted applications
• All Welded piping
• Fabricated Square Tubing Frame
  

---

Conditions of Operation
Max. Allowable Pressure / Temperature: 70 psig / 200oF
Discharge rate per pump: 3 to 150 gpm - nominal
Motor Size per pump: ½ to 5 Hp, 3 ph., 60 Hz

---